Asbestos Testing and Surveys in Compton

Typical cost in Compton

  • Testing for a small remodel, a few samples$400 – $800+
  • Whole-house survey before a remodel or demolition$600 – $1,500+
  • Air test after removal (clearance)$400 – $1,000+

Testing comes first. The South Coast Air Quality Management District asks for a survey prior to any demolition or renovation, apart from a single-unit house renovation under 100 square feet, so the samples are taken before a wall, floor or ceiling is opened.

Under the district’s rule, whoever surveys must hold a Cal/OSHA certification and have passed an EPA-approved Building Inspector course. A lab analyzes the collected samples, and the written survey pairs each one with its location and its result. Call us before anything gets opened.

Request a free quote
Stairway in a house with small tan patches on the ceiling and wall and white sample bags resting on the steps and the floor.

What testing covers

Samples for a remodel

Rooms come first. Tell us what you want to change and the sampling follows from that. In a kitchen it may be the floor, a wall and the ceiling, plus whatever sits inside the wall or ceiling cavity and under each flooring layer, all the way to the joist, because the district’s rule asks the survey to reach that far.

Survey before a teardown

A demolition needs the survey whatever the size of the house. The small-job survey exemption is for renovations only, and a bearing wall coming out counts as demolition under the rule.

What the report records

Read the report as a record of specific spots. Each entry names a sample, the place it came from and the lab result, and nothing in it speaks for rooms or materials that were not sampled.

Newer houses

Rule 1403 sets no cutoff by build year for the survey. The age of a house does not decide whether the survey applies, so a house from the 1990s starts the same way as one from the 1940s.

Who takes the samples

Please do not cut, scrape or bag samples on your own. Call us and the sampling goes to a certified consultant or technician.

Consultants and technicians

Certification is the dividing line in California. A Cal/OSHA-Certified Asbestos Consultant provides the consulting, technicians need certification to sample, and anyone planning or overseeing a removal project of 100 square feet or more needs it too. A removal crew is not the party that runs your survey.

Contractor sampling

AHERA inspector training lets a contractor take up to 12 samples in a residential dwelling under California rules. We treat that as a narrow permission to collect samples, not a way to certify a house, and the survey itself belongs to a certified consultant.

Two different lines

Two percentages show up in the paperwork. Cal/OSHA treats a material as asbestos-containing at more than 1/10th of 1 percent by weight, while the district’s floor definition and the state waste table work from 1 percent, so the lab’s number decides which rules touch your material.

Small renovations in single-unit homes

Small renovation jobs have their own rule. Take a residential single-unit dwelling where the work removes or strips less than 100 square feet of asbestos-containing material, counted by surface area, and the survey rule does not apply. Demolition, apartments, townhouses and condominiums get no such break, and only a lab result shows how much material a job involves.

Living room with pink walls and a brick fireplace, the carpet cut back from a rectangle of floor tile with dark edges.

After testing, see renovation and demolition abatement, or visit the home page.

Request a free asbestos removal quote

We recommend calling, but do feel free to contact us using this form. We'll get back to you with a free, personalized quote or additional questions as soon as possible. We're here to help.

Call (424) 373-5209

Call (424) 373-5209